Many people are helpless when faced with serious oil pollution, but fortunately we have an ultrasonic cleaning machine. With such a device and the corresponding cleaning skills, it can not only remove heavy oil, but also get twice the result with half the effort. . What should be done specifically?

      Many workpieces, especially refurbished parts such as cylinder blocks, cylinder heads, and cylinder heads, have accumulated a thick layer of mixed dirt such as oil, sludge, and carbon deposits. In order to remove it quickly, in addition to using an ultrasonic cleaning machine, the water temperature must be raised to about 70 degrees Celsius, and the corresponding cleaning agent must be added. Under the triple combination of ultrasonic wave, high temperature and degreasing agent, These dirt can be effectively removed.

      If you need to clean such workpieces in large quantities, it is a headache to imagine, and it is basically impossible to simply use a single-tank ultrasonic cleaning machine. In this case, it is recommended that you customize a multi-slot ultrasonic cleaning machine according to the actual size of the workpiece when the economy allows.

      Then a large number of workpieces are firstly washed with ultrasonic hot water; then ultrasonic hot water is washed; Under normal circumstances, a three-tank ultrasonic cleaning machine can meet the requirements, but if the equipment budget is relatively low, you can make two hot water tanks and order a single-tank ultrasonic cleaning machine, which can not only save solvent, but also have Significant cleaning effect.

      It has been proved that although the ultrasonic cleaning machine is more effective than the traditional cleaning method, due to the difference in power and frequency, it must be selected and used properly in order to achieve a multiplier effect with half the effort. Once the phenomenon of uneven cavitation occurs in the ultrasonic cleaning machine, the cleaning effect will be greatly reduced.

      In order to overcome this phenomenon, on the one hand, the position of the cleaning object can be moved. The parts with strong cavitation act on different surfaces to be cleaned. On the other hand, it is also possible to add or reduce a little cleaning solution in the cleaning tank, which can overcome the unevenness of cavitation.